Compact and powerful gauge LCR, is intended for the measurement LCR, beside 5 mile- per-second time intervals

• High rate of the measurements: 5 ms (1 kHz) or 13 ms (120 Hz)
• High precision accuracy: ± 0.08%
• Built-in comparator (comparator)

SPECIFICATION

Measured parameters	|Z|, Θ - phase angle, C, L, R, D (coeff. of scattering or the loss tangent), and Q
Method of the measurements	Source: stress 50 mV, 500 mV, 1 before, RMS (AC) Detection: stress, AC
Nominal frequency	120 Hz or 1 kHz
Ranges of the measurements	|Z|, R: from 10 m to 200.00 M[Om] (it depends on conditions), Θ - phase angle: from -90.00 to +90.00 °, C: from 0.940 pF to 999.99 mf, L: from 1.600 microns to 200.00 [k]H, D: from 0.0001 to 1.9900, Q: from 0.85 to 999.99
Basic accuracy	|Z|: ± 0.08% of measuring. value, Θ - phase angle: ± 0.05 °
Time of the measurements	From the rapid: 5 ms. to the slow: 300 ms. (with the frequency of 1 kHz) From the rapid: 13 ms. to the slow: 400 ms. (with the frequency of 120 Hz)
Display	[ZHKD], with the illumination, swing. induced number 99999
Function of the comparator	Installations: upper and lower limits, absolute value. Output: 3 levels (Hi, In, Lo), or (Pass, Fail), the open collector, isolated (locked)
External printer	9442 (to use with 9443-02 or -03/9444)
Power source	From 100 to 240 [v], AC (50/60 Hz)
Sizes and the mass	100 mm altitudes × of 210 mm latitude × 168 mm of thicknesses. Mass: 2.5 kg.
Accessories	Safety device (1), power cord (1)

3511-50 L[S]R TESTER cannot be used without the options. For the measurements one of the options is necessary: 9261 either 9262 or 9140

Options:

• 9140 four-terminal tester (DC to 100 kHz)
• 9143 tongs tester (DC to 5 MHz)
• 9261 test adaptation (with the coupling cables, DC to 5 MHz)
• 9262 test adaptation (with the direct connection, DC to 5 MHz)
• 9263 thermisters is temperature sensors (with the direct connection, DC to 5 MHz)
• 9268 DC voltage node is of displacement (± 40 [v] DC swing.)
• 9269 DC the unit of bias current (± 2 A DC swing.)
• 9165 junction cord (for 9268/9269; [V]NC to BNC, 1.5 m)
• 9166 junction cord (for 9268/9269; [V]NC to the clamp, 1.5 m)
• 9151-02/04 GP-IB coupling cable (2[m]/4[m])
• 9518-01 GP-IB the interface
• 9593 RS-232C the interface
• 9442 printers
• 9443-02 ACES is adapters (for 9442 EU) 9443-03 (USA)
• 9444 coupling cable (for 3511-50/9442)
• 1196 paper for the printer (25 m, 10 [rulonov]/1 collection for 9442)