Instrument is intended for power measurement, it can be used both before the production and with studies under laboratory conditions, it has high sensitivity and it is capable to measure the very low amount of power.

• The increased sensitivity is used for the measurements of the effective power of equipment before the regime without the load: current 1 mA with the permission of 0.1 µ[A]. 
• The wide range of the measurements of power to 60 kV, stress to 600 [v], current to 50 A, the direct introduction

SPECIFICATION

Measured lines	Single-phase 2- wire
Measured values	stress, current, active, total power, capacity rate
Intervals of the measurements	Stress	to 300 [v] OF RMS (peak values to 425 c)
	Current	to 30 A RMS (peak values to 42,5 a)
	Power	to 4 kW
Accuracy	± 0.1% of [i].[v]. ± 0.1% [p].[sh]. (active power, with the frequency from 45 [d]o 66 Hz).
Frequency characteristic	From 45 Hz to 5 kHz
Other functions	RS-232C interface, the function of scaling (PT/CT), (GP-IB only for model 3333-01)
Period of [vyborki]	5 times per second
Power source	From 100 to 240 [v] AC, 50/60 Hz.
Sizes and the mass	100 mm altitudes × of 160 mm latitude × 227 mm of thicknesses. Mass: 1.9 kg.
Accessories	Power cord (1), operating instructions (1).

Options:
9151-02 GP-IB coupling cable (2 m)
9151-04 GP-IB coupling cable (4 m)
9637 RS-232C coupling cable (9 contacts (pin) - 9 contacts (pin) of 1.8 m)
9638 RS-232C coupling cable (9 contacts (pin) - 25 contacts (pin) of 1.8 m)
9442 printers
9443-02 ACES is adapters (for printer 9442, eu), 9443-03 (USA)
9444 coupling cable (for printer 9442)
1196 paper for the press (25 m, 10 cylinders, for 9442)