The calibrator Of martel 3001 - this is multifunctional laboratory calibrator with the isolated channels. Precision calibrator 3001 unites before itself functional possibilities and special features of the calibrator Of [m]2001 (stress, current, thermocouple, RTD pressure) with the isolated measuring channels for the calibration laboratories, unsurpassed before the versatility, the performance and the merits. Like all calibrators of firm Martel, calibrator 3001 it is executed according to world standards, it is simple before the use, has intuitively intelligible interface for the user. Martel 3001 - calibration laboratory before one instrument.

• Accuracy of calibration 0.0025%
• Possibility of the data input based on the keyboard or with the aid of the cursor
• Generation/the measurement: thermocouple (13 types), RTD (9 types), current, stress, pressure (only measurement)
• Individual RTD and SPRT the profiles
• 9 points of calibration for each range and type
• Possibility of the remote control through RS232, USB and IEEE-488
• Is compatible c ON Fluke Of met/Cal Of software
• Isolated measuring channels
  - 2 ranges of the stress: 10[V] and 100[V] DC
  - Current from 0 to 52 mA
  - [Milliampernyy] range together with 24 VDC by the nourishment
  - Selective 250 Ohm HART the resistor

Specification

Output voltage
Range	Permission				Accuracy			Max. the load (~ 1 Ohm VYKh. apparent resistance)
0 - 100,000 mV	1 V				±0.003% of ±3 V			10 mA
0 - 1,00000 [v]	10 V				±0.003% of ±10 V			10 mA
0 - 10,0000 [v]	100 V				±0.003% of ±100 V			10 mA
0 - 100,000 [v]	1 mV				±0.003% of ±1 mV			1 mA
Output current
0 - 100,000 mA	1 A				±0.0005% ± 1 sign			10 [v]
Thermocouples
Output
Type	Range				Permission			Accuracy
J, K, T, E, R, S, N, B, L, U, C, BP, XK	mV				0,1 °[S]/°F			0.14 °C; the type J, typical
Entrance
J, K, T, E, R, S, N, B, L, U, C, BP, XK	mV				0,1 °[S]/°F			0.14 °C; the type J, typical
RTD
Output
Range				Permission				Accuracy
Pt385 (100, 200, 500, 1000), Pt392, Pt3916 (JIS), Ni120, Cu 10, YS Of i400				0,01 °C/°F; Pt385-100, typical				±0.05 of °C; Pt385-100, typical
Entrance (all RTD the entrances of the 4th wire)
Pt385 (100, 200, 500, 1000), Pt392, PT3916 (JIS), Ni120, Cu10, YSI400, 25 Ohm SPRT				0.001 °C/°F; Pt385-100, typical				±0.02 of °C; Pt385-100, typical
Resistance
Output
Range		Permission					Accuracy
4000,0 Ohm are 5th		400,00 Ohm are 5th: 0.001 Ohm 4000,0 Ohm are 5th: 0,01 Ohm					±0.05 Ohm ±0.3 Ohm
Entrance (the 4th wire connection)
0 - 4000,0 Ohm		0 - 400,00 Ohm: 0.001 Ohm 0 - 4000,0 Ohm: 0,01 Ohm					±0.004% of ±0,002 Ohm ±0.004% of ±0,02 Ohm
Pressure
Range			Compatability
0 - 1 inches H2O; to 10,000 psi			Entire BetaPort the modules, which use BPPA adapter and entire Fluke 700 Mensor of 6100 series the modules of the pressure
Isolated measuring channels
Range						Accuracy
0 - 10,0000 [v]						±0.005% of ±0.2 mV
0 - 100,000 [v]						±0.005% of ±2,0 mV
0 - 52,0000 [m]A						±0.01% of ±1 of [mk]A
Voltage of supply of the current loop						24 V ±10%
HART™ the resistor						250 Ohm ± 3%
Maximum current						24 mA

General given

Warm-up time: 30 minutes to the output down the maximum accuracy
Temperature drift: 10% of the accuracy of/°[S] (in the range ≤18°[S] and of ≥28°[S]) indicated
The operating temperature: 0°C to of +50°C
Storage temperature: -20°C to of +70°C
Humidity:
worker <80% to 30°C
<70% to 40°C
<40% to 50°C
storage <95%, without the condensate

Power requirements
Range of the stress: 90 to 240 VAC
<15 VA

Sizes: 17.7 cm x of 48.26 cm x of 27.96 cm
Weight: 4,8 kgf
Display: 2 16- TI of symbolic 2nd small LCD of display with the illumination

Standard assembly:
Cable of the nourishment
Thermocouple of shorting of jumper

Options for the order
- IBP-2 PT100 of high accuracy the tester
- 80029 JKTE the set of the thermocouples
- 80036 RSNB the set of the thermocouples
- PTL-1 Of low EMF Of beryllium Of copper Of test Of leads

The calibrator 3001 and the options enumerated above is accessible before the complete assembly