|
|
| Gauge RLC 3535 |
|
Instrument possesses the high speed of testing, it can test indicator microcircuits and magnetic heads, it is irreplaceable before the drawing and designing works.
- Interactive control panel
- High rate of the measurements: 6 ms. for one [vyborki]
- Detachable audio frequency amplifier
- Function of the levelling off of the load
- Fourteen measured parameters
- Wide frequency band (from 100 kHz to 120 MHz)
Specification
|
Measured parameters |
|Z|, |Y|, The angle of displacement of phases -Θ, Rp, Rs (ESR), G, the X, B, Cp, Cs, Lp, Ls, D (loss tangent), and Q |
|
Ranges of the measurements |
|
Range 1 kilohms |
Range 10 kilohms |
Range 100 kilohms |
|
Z, R |
100 m - 2 kilohms |
1 kilohms - 20 kilohms |
10 kilohms - 300 kilohms |
|
C |
0.66 p[F] - 15.9 µ[F] |
0.066 p[F] - 1.59 n[F] |
4.4 f[F] - 159 p[F] |
|
L |
0.133 NH - 3.18 mH |
1.33 µH - 31.8 mH |
13.3 µH - 477mH |
|
Θ |
|
From -180.00° to 180.00° |
|
|
Measurement of the frequency |
From 100 kHz to 120 MHz (steps: 100 Hz, 1 kHz, 10 kHz and 100 kHz) |
|
Basic accuracy |
|Z|: ± 0.5% of measuring. value, the phase angle: ± 0.3 ° |
|
Output impedance |
50 ±10 Ohm (with 100 kHz) |
|
Level of the measured signal |
From 5 mV to 1 before, 20 mA of max. (to 10.00 M[Gts]) From 5 mV to 500 mV, 10 [m]A of max. (more than 10.01 M[Gts]) Installation of the permission: step 1 mV
From 200 µA to 20 [m]A: 1 [v] of max. (to 10.00 M[Gts]) From 200 µA to 10 [m]A: 0.5 [v] of max. (more than 10.01 M[Gts]) Installation of the permission: the step of 10 µA |
|
Time of the measurements |
6 ± 1 ms. (nominal) |
|
Display |
[ZHKD], with the illumination, swing. induced number 99999 |
|
Other functions |
Function of average trigger. Function of audio frequency amplifier. Systematized (BIN) measurements. Correlation. Function of equalizing. Panel of retention and load. Retention of the results of measurements. Function of a magnification in the image. Function of continuous measurement. Sonic tester (for the search for malfunctions), the function of digital installation. Tuning screen. Function of press. Comparator (comparator). Function of blocking keys. Function of the installation of upper and lower limits. |
|
Interface |
GP-IB, RS-232C and EXT. I/O |
|
Power source |
From 100 to 240 [v] AC, 50/60 Hz., 50 [v] A |
|
Sizes and the mass |
130 mm altitudes × of 360 mm latitude × 360 mm of thicknesses. Mass: 8.3 kg. |
|
Accessories |
Power cord (1) |
3535 L[S]R gauge cannot be used without the options. For the measurements the options are necessary: 9700-10 and 9677 or 9699
Options: 9700-10 audio frequency amplifier 9677 SMD the test adaptation (marking [SE] it is absent) 9699 SMD the test adaptation 9678 the coupling cable 9151-02/04 GP-IB coupling cable (2[m]/4[m]) 9442 printers 9443-02 ACES is adapters (for 9442 EU) 9443-03 (USA) 9444 coupling cable (for 3535/9442) 1196 paper for the printer (25 m, 10 [rulonov]/1 collection for 9442)
Current page:
Gauge RLC Of hioki 3535 |