Compact, safe instrument, which makes it possible to determine the sequence of alternating the phases, completely insulated wire. For the greater safety of operator, the instrument must work with insulated wire, which prevent contact with the metal.

• Instrument has a marking [SE] and corresponds to the class of electrical safety CAT III 600V.
• The detection of phases is signaled by visual and sound signals.
• Determination of the alternation of phases on insulated wire.
• Function of automatic turning off of the nourishment of the instrument
• The indicator of battery, begins to blink with the almost run-down battery.

Specification

Functions of the measurements	Detection of phases (positive, negative), checking wires down the presence of stress (only R-t)
Method the detection of the stress	Method of electrostatic induction
Range of the stress	From 70 to 600 [v] AC (50/60[Gts]), (sinusoidal fluctuation, the continuous data input)
Diameter the clamps	17 mm of max. insulated wire
Image the signals	Detection the phases	Positive: 4 light-emitting diodes consecutively catch fire before the direction of rotation of hour hand and they are heard three short sound signals
		Negative: 4 light-emitting diodes consecutively catch fire before the direction down the counterrotation of hour hand, and one prolonged sound signal is heard
	Checking wire down the presence of the current	R-s and S- T light-emitting diodes will burn if the stress between the wires within the limits of the range of the stresses indicated
Function checking the charge of the battery	If light-emitting diode ON blinks, then battery is almost discharged
Automatic turning off of the nourishment	Turning off of nourishment will occur after 15 minutes based on the moment of the last action
Power source	Two batteries “AA”, the stress: DC 3.0 [v], swing. the power: 300 mVA, Operating time: approximately 70 hours
Sizes and the mass	75 mm altitudes × of 70mm latitude × of 30 mm[Tolshch]. Mass: 0.2 kg. it is long the cord of 0.7[m]
Working conditions	From 0 to 40°[S], relative humidity is not more than 80%
Storage conditions	From -20 to 60°[S], relative humidity is not more than 80%
Accessories	Bag for the transfer (1), belt (1), two magnesium batteries R6P, spiral-seamed pipe (1), the management of user.