Instrument is intended for control and analysis of the parameters of the quality of electric power. With the aid of the instrument it is possible to track starting currents, failures and gallops of stress, to produce measurements and record of the required power.

• [ZHK] color picture screen.
• Possibility to observe changes in the load, current and voltage beyond the screen before the graphic form.
• Image of measured data before the real time: the waveform, vectors, measured values and harmonics.
• The wide range of the measurements of current to 5000 a.
• Possibility of work with different networks.

SPECIFICATION

Networks, with which works the instrument	Single-phase 2- wire, single-phase 3- wire, three-phase 3- wire, three-phase 4- wire, (50/60 Hz).
Signal frequency before the network	Automatic detection of signal frequency (50/60 Hz).
Range of the stress	600.0 v.
Range of the current	Possibility of switching 2 ranges, established according to the current-measuring tongs: 500.0 mA/5.000 A/of 50.00 A/10.00 A/of 100.0 A/500.0 A/1.000 kA/of 5.000 kA.
Functions of the measurement	1. Short-term overvoltage. 2. Failures, the gallop of stress. 3. Frequency, stress, current, the peak values of the current/stress, active/reactive/total power, capacity rate. 4. Harmonics of the current/stress/of power, harmonic of the phase angle of stress.
Intervals of the record	AUTO/1/5/10/15/30/60 minutes.
Maximum period of the record	125 days with the capacity of storage 4 mb. The results of measurements remain before the memory of the instrument even in the absence nourishment. The separation of memory beside 4 segments is possible, then the duration of the record of one segment there will be 31 days.
The internal storage	4 mb.
Interface	USB 2.0.
Power source	9418-15 ACE is adapters or 9459 packing of batteries.
Sizes and the mass	246 mm. altitudes of the X 128 mm. latitude of the X 63 mm. of thicknesses. Mass: 1.2 kgf (with the batteries).
Accessories	Complete set of cords for measuring the stress (black, red, yellow, and blue) (1), the packing of batteries (1), adapter (1), USB cable (1), ON beyond the disk CD (1), bag for the transfer (1), belt for the transfer (1).

Options:
9660 tongs (100 A ACE)
9661 tongs (500 A ACE)
9669 tongs (1000 A ACE)
9667 tongs (5000 A ACE)
9694 tongs (5 A ACE)
9695-02 tongs (50 A ACE)
9695-03 tongs (100 A ACE)
9219 junction cord (for 9695-02/9695-03)
9657-10 tongs (10 A ACE)
9675 tongs (10 A ACE)
9438-03 complete set of cords for measuring the stress
9459 packing of the batteries (they enter into delivery set)