Instrument is intended for power measurement, it can be used both before the production and with studies under laboratory conditions, it has high sensitivity and it is capable to measure the very low amount of power.

• Possibility of measuring the stress DC, AC, DC+AC
• Integrated functions for the current and the power
• High accuracy of measurement with error ±0.2%
• Increased period of the guaranteed accuracy of up to 3 years
• The wide range of the measurements of power to 9 kV, stress to 300 [v], current to 30 A, direct introduction,

SPECIFICATION

Measured lines	Single-phase 2- wire
Measured values	Stress, current, active, total power, capacity rate, frequency, association (current and active power), mapping waveform (current and stress)
Intervals of the measurements	Stress AC/DC	to 300 [v] OF RMS
	Current AC/DC	to 30 A RMS
	Power	to 9 kW
Introductory resistance	2.4 M - stress, 10 m or is more - current (50/60 Hz, by tonic introduction)
Accuracy	stress, current and the active power (less than 50%)		current and active power (from 50% to 100%
	± 0.1% of [i].[v]. ± 0.2% [p].[sh]. (DC)
	±0.1% of [i].[v]. ± 0.1% [p].[sh]. (45[Gts] - 66[Gts])		±0.2% of [i].[v]. (45[Gts] - 66[Gts])
	±0.1% of [i].[v]. ± 0.2% [p].[sh]. (66[Gts] - 1[kGts])		±0.3% of [i].[v]. (66[Gts] - 1[kGts])
	±3% of [i].[v]. (1[kGts] - 5[kGts])		±3% of [i].[v]. (1[kGts] - 5[kGts])
Frequency characteristic	From 45 Hz to 5 kHz
Form of fluctuations against the output	Image of the leading-out parameters: stress, current and active power (3 channels simultaneously)
Analog output	Image of the leading-out parameters: stress, current and active power and the selection of each parameter separately (4 channels simultaneously)
Other functions	RS-232C interface, the function Of true RMS, average [arefmiticheskoe] value DC, the retention of maximum value, the relationship of the parameters of installation VT or CT, the averaging of value.
Period of [vyborki]	5 times per second
Power source	From 100 to 240 [v] AC, 50/60 Hz.
Sizes and the mass	100 mm altitudes × of 210 mm latitude × 245 mm of thicknesses. Mass: 2.5 kg.
Accessories	Power cord (1), operating instructions (1).

Options:
9151-02 GP-IB coupling cable (2 m)
9151-04 GP-IB coupling cable (4 m)
9637 RS-232C coupling cable (9 contacts (pin) - 9 contacts (pin) of 1.8 m)
9638 RS-232C coupling cable (9 contacts (pin) - 25 contacts (pin) of 1.8 m)
9266-01 leading-out cable for power measurement
9442 printers
9443-02 ACES is adapters (for printer 9442, eu), 9443-03 (USA)
9444 coupling cable (for printer 9442)
1196 paper for the press (25 m, 10 cylinders, for 9442)