HT4016 - [tokopreobrazuyushchie] tongs, that make it possible to measure alternating and direct current to 400 A, and also the voltage of alternating and direct current, resistance and electrical conductivity. Probe can be established before the cover of tongs (patented) and it makes it possible to conduct measurements by one hand. Large [ZHKD] 3? sign (4.000 units), with the illumination and the analog scale for the work due to the merciless terms. Tongs completely correspond to standard EN 61010-1, CAT III 600V.

Basic functions

• the measurement of the significant values
• the measurement of alternating current down 400[A]
• the measurement of direct current down 400[A]
• the measurement of the voltage of alternating and direct current out of 600[V]
• the measurement of resistance to 40 [M]W
• the integrity of wires with the sonic buzzer
• [avtoranzhirovanie], the retention of the measured value, the illumination
• [izmereniemaks]/min
• the indication of discharging the small batteries

Specification

Stress DC
Range, before	400[mV]/4/40/400/600
Accuracy	±0,8% of IV + of 3 unit of mf
The input impedance	10[M]
Protection on the overload	660[V] Of [aS]/DCrms
Stress is ACE, before
Range, before	400[mV]/4/40/400/600
Accuracy	± 0,8% of IV + of 3 unit of mf
The input impedance	10[M]
Protection on the overload	660[V] Of [aS]/DCrms
Current is ACE, A
Range, before	40/400 A
Accuracy	±2,0%[IV] + of 10 unit of mf
Protection on the overload	600A[S]rms
Current D[S], A
Range, A	40/400
Accuracy	±2,0%[IV]+10 of [ed].[sch]
Protection on the overload	600A[S]rms
Resistance
Range,	400 - 40[M]
Accuracy	±1,0%[IV]+ of 5 unit of mf
Protection on the overload	600[V] Of [aS]rms

General characteristics

Display	3 ¾ numbers, 4000 units
Rate of reading	2 times/flogged
Nourishment	2 small batteries, 1,5[V], type [AAA]
Time of the service of the small batteries	approximately 100 hours
Diameter of the seizure	32 mm