GEOTEST 2016 measures the ground resistance according to 2 or 3 wire diagrams with the minimum permission 0,01 Ohm and the specific resistance (conductivity) of ground Of rho with the minimum permission of 0,01 [Om]*[m].

Instrument is allowed

• To conduct the measurement of the ground resistance according to 2 or 3 wire diagrams
• To produce the calculations of the results of the measurements
• To conduct the measurement of the specific resistance of ground according to 4 wire diagrams
• To memorize results.

Instrument has the built-in interface RS232 and large [ZHKD]. Performance of instrument with the dual isolation of housing (class 2). Nourishment from the small batteries or the network through the adapter.

Specification

Measurement of the ground resistance
Range RE, W	Permission, W		Accuracy
0,01 - 19,99	0,01		± 2,0%[IV] + of 3 unit of mf
20,0 - 199,9	0,1
200 - 1999	1
Test signal of 125 [Gts]/75 Of [gts]/41,66 Hz ± of 1 Hz (sinusoids.) Test current/stress to 10 mA/to 20[V] (waveform sinusoidal)
Measurement of the specific resistance of ground
Range R, [k]W[m]	Permission, [k]W[m]	Accuracy
0,6 - 125,6 W[m]	0,1 W[m]	± 2,0%[IV] + of 3 unit of mf
0,125 - 1,256	0.001
1,25 - 19,99	0,01
20,0 - 199,9	0,1
Test signal of 125 [Gts]/75 Of [gts]/41,66 Hz ± of 1 Hz (sinusoids.) Test current/stress to 10 mA/to 80[V] (waveform sinusoidal)
Measurement of stress (induced)
Range, before	Permission, before		Accuracy
500	1		± 2,0%[IV] + of 2 unit of mf

General given

Display	[ZHK], 65*65 mm, 3 ½ the number
Nourishment	6 small batteries, 1,5LR6-AA-AM3- MN 1500
The operating temperature	-5… 50 °[S], OTN humidity <80%, the fact- Ra the calibration of 23±5 of °[S]
Overall sizes/the mass	222*162*57 mm/of 1 kgf
Memory	999 tests, storage of information 5 min. after turning off of the nourishment

Standardly supplied accessories
KITTERR4C - transport case, 4 measuring wires and probes “banana- crocodile”, 4 pintles of grounding, BORSA2000 - case, the certificate of calibration according to ISO9000, management on the operation, the guarantee certificate.
Accessories to order
EUROLINK2000 - ON the opto-cable of the connection

Standards of the safety
CE of mark, EN 61326, EN 61010-1, EN 61557, 16th of edition, HD 384