Current tongs HT7016 - this the instrument, intended for measuring the real rms value (True RMS) of alternating current to 600 A, stress to 1000 [v] corresponds to category 2 (dual isolation) for providing of safety CAT. THE III - 600 V according to EN 61010-1. Model HT7016 does have large [ZHKD] 3? display (4.000 units), with the illumination and the analog scale for the convenient work due to the critical conditions. Any of 6 functions can be selected with the aid of the switch, including key for the start of the function of the retention of measurements. HT7016 automatically is turned off, if it they do not use during 30 minutes, which considerably economizes small battery. The maximum diameter of seizure - 51 mm. also instrument has the functions “OF MIN OF MAX”, “PEAK” for measuring the minimum, maximum and peak values.

• the measurement Of true RMS of alternating current and voltage
• the measurement of the peak values of current (IAC) and of voltage (VAC)
• the measurement of DC voltage (VDC).
• the measurement of the resistance
• the measurement of the frequency
• the test of electrical conductivity with the electro-interrupter.

General characteristics

Display	[ZHK] 3 ¾, the analog scale
Rate of the measurement	1,5 ism/flogged
Nourishment	1 small battery, 9 [v] OF NEDA of 1604 IEC of 6F22 JIS 006P
Time of the service of the small batteries	about 200 hours
Size/the mass	275 * 90 * 51 mm/of 420 deg.
Ø of the seizure	51 mm
The operating temperature	0… 40 °[S], humidities not are more than 80%
Safety accordingly	EN 61010-1
Isolation	[sat] 2, dual
Pollution	level 2
Category	CAT IV 600V, CAT OF THE III 1000 V among the entrances,
	CAT IV600V, CAT OF THE III 1000 V to the earth